Sleep The Machine is in Sleep Mode (Power Save Mode). To wake up the machine, do one of the following. - Press any key. - Open the Top Cover. - Load your document.
The Power and Scan to USB LEDs are on. The Scan to PC LED is blinking. The Error LED is off. * The Scan to USB LED is off if the USB flash memory drive is not connected to your Brother machine.
The Power and Scan to PC LEDs are on. The Scan to USB LED is blinking. The Error LED is off. * The Scan to PC LED is off if your computer is not connected to your Brother machine.
Meaning of the LED Indication:
Scanning to USB Scan to USB is in process.
Checking Device The machine is checking the connected USB device.
The Power LED is on. The Scan to PC and Scan to USB LEDs are blinking. The Error LED is off.
Meaning of the LED Indication:
Ejecting Paper The machine is ejecting paper. When you cancel the scanning job while scanning, the paper in the ADF (automatic document feeder) will be automatically ejected in a while. If the paper will not be ejected automatically or the error is not cleared after the paper has been ejected, please press Stop.
The Power and Scan to USB LEDs are on. The Error LED is blinking. The Scan to PC LED is off.
Meaning of the LED Indication:
Out of Memory The machine's memory is full and the machine cannot scan the entire document. Do one of the following: - Press any key. - Turn the machine off and then on by unplugging the machine from the AC power outlet (electrical socket) and then plugging the machine in again.
The Power and Scan to PC LEDs are on. The Error and Scan to USB LEDs are blinking.
Meaning of the LED Indication:
Unsupported Device An unsupported USB device such as a mouse or a mobile device which does not support USB mass storage standard is inserted into your Brother machine. Remove the USB device from the USB direct interface.
The Power LED is on. The Error, Scan to PC and Scan to USB LEDs are blinking.
Meaning of the LED Indication:
Hub is Unusable Do not use a hub when connecting your computer or a USB device to your Brother machine. Unplug a hub from your Brother machine and connect the USB device directly to the USB interface.
The Error and Scan to USB LEDs are blinking. The Power and Scan to PC LEDs are off.
Meaning of the LED Indication:
Storage Full The connected USB flash memory drive is full. Press any key and then do one of the following: - Delete unused files or folders from the USB flash memory drive and then try again. - Use a USB flash memory drive that has available space.
The Power LED is on. The Error and Scan to USB LEDs are blinking. The Scan to PC LED is off.
Meaning of the LED Indication:
Protected Device The connected USB flash memory drive is write-protected. Disconnect the protected USB flash memory drive, press any key and then do one of the following: - Turn off the USB flash memory drive's write-protection and then try again. - Use a USB flash memory drive that has write-protection turned off.
The Power, Error and Scan to USB LEDs are blinking. The Scan to PC LED is on.
Meaning of the LED Indication:
Too Many Files The number of files which can be saved in the root folder of the USB flash memory drive is limited. If you can't save a scanned data even though the USB flash memory drive has available space left, it may contain too many files in the root folder. Disconnect the USB flash memory drive, press any key and then do one of the following: - Create a new folder on the USB flash memory drive and move files to it. - Delete unused files or folders from the root folder of the USB flash memory drive and then try again.
The Power, Error and Scan to USB LEDs are blinking. The Scan to PC LED is off.
Meaning of the LED Indication:
Rename the File When you save scanned documents to the USB flash memory drive, the number of the files which can be automatically named by setting a prefix of the file name is limited to 100. Press any key and then do one of the following: - Change the setting of the file name. - Rename the files in the USB flash memory drive or create a new folder and move the files to it. - Delete unused scanned files in the USB flash memory drive.
The Power and Error LEDs are on. The Scan to PC and Scan to USB LEDs are off.
Meaning of the LED Indication:
All scanned pages were skipped All scanned pages were skipped as blank pages. Press any key and then do one of the following: - Place your document, face down, top edge first in the document feeder. - Set Blank Page Skip to Off.