TD-4520DN

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I clean my printer?

Always disconnect the printer from any power source before cleaning.

Follow the instructions below:

 

<Print head maintenance>

Place the product on an Electrostatic Discharge (ESD) grounding mat or use anti-static gloves, otherwise this product or its accessories may get damaged or destroyed.

Wipe the print head with a lint-free cloth or cotton swab dipped in isopropyl alcohol or ethanol.
We recommend cleaning the print head on a regular basis.

Print Head

Use isopropyl alcohol or ethanol according to the manufacturer's safety guidelines, as applicable.

 

<Roller maintenance>

Wipe the roller with a lint-free cloth dipped in isopropyl alcohol or ethanol. After cleaning the roller, make sure that no lint or other material remains on the roller.
Roller

Use isopropyl alcohol or ethanol according to the manufacturer's safety guidelines, as applicable.

 

<Exterior of the unit maintenance>

Wipe any dust and marks from the main unit using a soft, dry cloth.
Use a cloth slightly damp with water if it is difficult to remove marks.

Do not use paint thinner, benzene, alcohol or any other organic solvent.
These may deform or damage the printer case.

 

<Label Output Slot maintenance>

If adhesive residue gets attached to the Label Output Slot, it may cause label jams. Clean the Label Output Slot with a dry cotton swab.

Do not use alcohol to clean the Label Output Slot.

Label Output SlotLabel Output Slot

If your question was not answered, have you checked other FAQs?

Have you checked manuals?

If you need further assistance, please contact Brother customer service:

Related Models

TD-4410D, TD-4420DN, TD-4520DN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.