SDX1200

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 03/10/2018
  • ID: faqh00000689_002

The mat cannot be inserted.

 

Possible Causes (or Results)

 

Case1 :  When the mat was inserted, it was not placed under the feed rollers.
Case2 :

The mat was not loaded using the image(Feed) button.
Case3 : The feed roller is not positioned correctly.
Case4 :  The shaft is released.

 


 

 

 

Solutions

 

----- Case1 -----
 

Insert the mat so that it is placed under the feed rollers on the left and right sides of the feed slot.

image

(1) Guides
(2) Feed rollers



 

----- Case2 -----

Lightly insert the mat into the feed slot, and then press the image(Feed) button.

image

 

The mat is fed in to complete the preparations for cutting.
 

 

 

 

----- Case3 -----
 

Adjust the position of the feed roller.
Move the feed roller toimage position for normal operations.
Move the feed roller toimageposition when the roll feeder is being used.
For details on adjusting the position of the feed roller, refer to Adjusting the Position of the Feed Roller.
 

image

(1) Shaft

(2) Feed roller
(3) Feed roller lock dial

 

 

 
 

----- Case4 -----
 

Lock the shaft.
For details on adjusting the position of the feed roller, refer to Adjusting the Position of the Feed Roller.
 

image (1) Feeder release lever



 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

SDX1200

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit