How do I clean the race?

Sewing performance will suffer if lint and dust collects in the bobbin case, therefore, it should be cleaned regularly.

  • Make sure you unplug the machine before you clean it. Otherwise, you may get an electric shock or be injured.

 

 

  1. Turn off the machine and unplug the power cord.

     

  2. Raise the needle and remove the presser foot.

     

  3. Remove the needle and the presser foot holder.
    img01 img02 (1) Screwdriver

     

  4. Loosen the two screws and remove the needle plate.
    img03 (1) Screwdriver
    • Be careful not to drop the removed screws in the machine.
  5. Remove the bobbin case, and remove any dust from the race and its surrounding area.img04
    (1) Bobbin case (2) Cleaning brush (3) Race
    • Do not put oil on the bobbin case.
    • Compressed can air is not recommended to be used.
  6. Insert the bobbin case so that the img05 and img06 marks align.
    img07 (1) img08 mark
    (2) img09 mark
    • Never use a bobbin case that is scratched, otherwise the upper thread may become tangled, the needle may break or sewing performance may suffer. For a new bobbin case, contact your nearest Brother authorized service center.
    • Make sure that you fit the bobbin case properly, otherwise the needle may break.
  7. Attach the needle plate, and then tighten the screws.
    img08

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

FS60X

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.