PR650e/PR650eC

FAQs & Troubleshooting

FAQs & Troubleshooting

Fabric/stabilizer compatibility chart

Fabric/ Garment No. of Backing Pieces No. of Topping Pieces Comments
Terry cloth 1 tear-away 1 water-soluble Increase density and/or satin stitch width.Fine details and small lettering tend to get caught in the terry loops.
Satin jacket Heavy lining: None

Light or no lining: 1 tear-away
None If garment slips in frame, causing alignment problems, wrap inner frame with masking tape or fabric bias tape.
This provides a rough surface to grip garment and also helps minimize frame burn.
Cotton sheeting 1 tear-away None High-density or highly detailed patterns may require more backing. If so, use two pieces of lightweight backing instead of one piece of heavy backing.
Denim 1 tear-away None Reduce speed if needle begins to heat up and the thread breaks.
Headwear Optional Optional Change needles more often than usual because the buckram backing dulls needles faster. A lightweight tear-away backing helps reduce thread breaks and regulates thread tension. Use a topping on corduroy or foam cap fronts.
Dress shirt (woven) 1 tear-away None High-density or highly detailed patterns may require more backing.If so, use two pieces of lightweight backing instead of one piece of heavy backing.
Golf shirt 1 cut-away Optional Use topping for patterns containing small lettering or a lot of detail, and also for pique knits.
Canton fleece 1 tear-away Optional Use a topping if the garment has a textured surface, such as a basketweave or pronounced twill.
Canvas 1 tear-away None Frame tightly
Corduroy 1 tear-away 1 water-soluble A higher stitch density or more understitches, as well as a topping, may be necessary to prevent stitches from sinking into the fabric.
Lingerie or silk 1 or 2 lightweight tear-away Optional Reduce sewing speed.
The thread tension should be low. Use topping for patterns with high detail or small lettering.For very fine fabrics, use a thinner thread. Avoid extremely narrow satin stitching on letters or details; instead increase satin stitch width or use a bean stitch. Gently remove (don't pull) backing and topping from garment.
Sweater knit 1 cut-away or adhesive tea-away 1 water-soluble Use tightly woven organza or curtain fabric in a matching color as a backing for bulky or "holey" knits.
Sweatshirt 1 cut-away or adhesive tear-away Optional Highly detailed patterns may require two layers of lightweight cut-away stabilizer. Use a topping on extra-thick fabrics or with fine-detail patterns.
T-shirt 1 light-weight cutaway or adhesive tear-away Optional Use a topping on patterns with fine detail or small lettering. Tensions should be light.
Avoid stitch-heavy patterns.

Due to the wide variety of fabrics and stabilizers available, the above information should be used as guideline only.
If unsure of a particular fabric/ stabilizer combination, please sew test a sample prior to the finished garment.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PR1000e, PR1X, PR650e/PR650eC, PR655/PR655C, VR

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.