DCP-T420W

FAQs & Troubleshooting

FAQs & Troubleshooting

Improve poor print quality.

We recommend using genuine Brother supplies to ensure stable print quality and performance. Although not all non-genuine supplies may cause quality issues, using non-Brother supplies or refilling ink cartridges with third party ink, may adversely affect print quality or cause the machine to malfunction. The Brother limited warranty does not apply to any problem caused by the use of third party supplies.

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

 

Cleaning the four color print heads (black, cyan, magenta and yellow) and/or adjusting the vertical alignment may improve the print quality. To determine if the alignment needs to be set and to identify which print heads need to be cleaned, print the Print Quality Check sheet and the Alignment Check sheet.

 

Below are instructions for improving the following:

 

  • White lines in text or graphics
  • Blank text
  • Blurred or faded text and images

Follow the instructions that apply to your issue.

 

 

Section 1: Checking the print quality and cleaning the print head

Print the Print Quality Check Sheet and look at the nozzle check pattern.
If print head cleaning is needed, following the machine's display instructions.
> Click here to see how to print the Print Quality Check Sheet.

If the issue continues, check the following points:

 

  • Check and adjust the paper feed.
  • Try using the recommended types of paper.
  • To prolong print head life, provide the best ink cartridge economy and maintain print quality, we do not recommend frequently unplugging the machine and/or leaving the machine unplugged for extended periods of time. We recommend using Power On/Off(Power On/Off) to power down the machine. Using Power On/Off(Power On/Off) allows minimal power to the machine, resulting in periodic, but less frequent, cleaning of the print head.

 

 

Section 2: Checking the Print Alignment

Print the Alignment Check Sheet and adjust the print alignment.
> Click here to see how to print the Alignment Check Sheet.

If the issue still continues, change the print setting options.

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-T220, DCP-T420W, DCP-T426W, DCP-T520W, DCP-T720DW, DCP-T820DW, MFC-T920DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.