FAQs & Troubleshooting

FAQs & Troubleshooting

Set Up the Brother Machine Using Remote Setup (Windows®)

  1. Click (Start)>All Programs>Brother>[model name]>Remote Setup.
  2. Select your model name in the Discover Devices dialog box, and then click Connect.
    The Remote Setup Program window appears.
  3. Configure the settings as needed.
    • Your screen may differ from the screen shown.
    Click to save the current configuration settings to a file.
    Click to read the settings from a file.
    Click to start uploading data to the machine, and then exit the Remote Setup Program. If an error message appears, confirm that your data is correct, and then click OK.
    Click to exit the Remote Setup Program without uploading data to the machine.
    Click to upload data to the machine without exiting the Remote Setup Program.
  4. Click OK.
  • If your computer is protected by a firewall and is unable to use Remote Setup, you may need to configure the firewall settings to allow communication through port numbers 52515-52614.
  • If using Windows® Firewall and you installed the scanner driver, the necessary firewall settings have already been set.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

ADS-2200, ADS-2700W

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.