PR680W / PR680WC

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 29/11/2021
  • ID: faqh00101583_000

How to configure operator lock

  1. Touch img01 , then img02 .
    The general settings screen appears.
     
  2. Locate [Passcode Setting] in the Settings pages.
     
  3. Touch [ON] beside [Operator Lock].

    img03
    • To change the passcode, continue with step 4.
    • If the passcode will not be changed, continue with step 8. (The initial passcode is 9999.)
  4. Touch img04 beside [Operator Lock].
     
  5. Type in the new passcode (4 digits).
     img05
     
  6. Type it in again for confirmation.
    • If a mistake was made while typing, start over with the first digit.
    img06
     
  7. Touch img07 .
    img08
     
  8. Touch img09 .
    Afterwards, each time the LCD screen is locked, the 4-digit passcode must be entered to continue operation.
    As shown below, img10 (Lock screen key) is displayed.
    img11

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PR680W / PR680WC

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit