Innov-is NV800E

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 29/07/2016
  • ID: faqh00000250_002

"Lower the presser foot lever." message appears on the LCD. What does it mean and how do I clear it?

This message is displayed when the image  (Presser Foot Lifter button) is pressed while the presser foot lever is raised/the needle is lowered.

Lower the presser foot lever manually to lower the presser foot.

image (1) Presser foot lever

 

 

Alarm Sounds

  • If the operation procedure was correct, the machine will beep once.
  • If the operation procedure was incorrect, the machine will beep twice or four times.
  • If the machine locks up, for example, because the thread is tangled. The machine beeps for four seconds and the machine automatically stops. Be sure to check for the cause of the error and correct it before continuing to sew.

If you want to turn the operation beep off, press image  to display the settings screen.

Press image2 or image3 until  "Buzzer" displays on the settings screen, and set "Buzzer" to "OFF".

 

image

 

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is NV800E, Innov-is NV880E

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit