PE-DESIGN 10

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 20/03/2015
  • ID: faqh00000009_000

Embroidery

  • Problem that occurs most in embroidery is misalignment of pattern.
    This is caused mostly because a fabric is loose when it's set into an embroidery frame.
    Make sure to set a fabric tightly into an embroidery frame so that you may hear a drum-like sound if you tap the set fabric lightly.

  • Use a stabilizer material when you sew thin fabrics, stretch fabrics or fabrics which easily pucker.
    Prepare a stabilizer material that is larger than an embroidery frame to be used.
    Make sure to attach right surface of stabilizer material to a fabric securely by using an iron.
    Fabric 1 Fusible side of stabilizer

    2 Fabric(wrong side)
  • Use Brother embroidery threads and needle 75/11 for embroidery.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is 1500D/1500, Innov-is 750E, Innov-is 950, Innov-is 95E, Innov-is 980D, Innov-is 980K, Innov-is M330E, Innov-is M380D, Innov-is NV180, Innov-is NV180D, Innov-is NV180K, Innov-is NV18E, Innov-is NV800E, Innov-is NV880E, Innov-is V3, PE-DESIGN 10, PE-DESIGN 11, PE-DESIGN NEXT

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit