MFC-L2715DW

FAQs & Troubleshooting

FAQs & Troubleshooting

Send a Fax in Real Time

When sending a fax, the machine scans the document into the memory before sending it. As soon as the telephone line is free, the machine starts dialling and sending. If you want to send an important document immediately without waiting for the machine to retrieve the scan from its memory, turn on [Real Time TX].
  • If the memory is full and you are sending a fax from the ADF, the machine sends the document in real time (even if [Real Time TX] is set to [Off]). If the memory is full, faxes from the scanner glass cannot be sent until you clear some of the memory.
  • In Real Time Transmission, the automatic redial feature does not work when using the scanner glass.
  • If [Real Time TX] is set to on, the option to scan 2-sided documents is not available.

MFC-L2710DW/MFC-L2713DW/MFC-L2715DW/MFC-L2716DW

  1. Press (FAX).
  2. Load your document.
  3. Press Menu.
  4. Press or to display the [Fax] option, and then press OK.
  5. Press or to display the [Setup Send] option, and then press OK.
  6. Press or to display the [Real Time TX] option, and then press OK.
  7. Press or to display the [On] option, and then press OK.
  8. When finished, press Stop/Exit.
  9. Enter the fax number.
  10. Press Start.

MFC-L2730DW/MFC-L2750DW/MFC-L2751DW/MFC-L2770DW/MFC-L2771DW

  1. Load your document.
  2. Press [(Fax)]>[Options]>[Real Time TX].
  3. Press [On] or [Off].
  4. Press [OK].
  5. Enter the fax number.
  6. Press [Fax Start].

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-L2715DW, MFC-L2750DW, MFC-L2770DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.