MFC-7420
 |
FAQs & Troubleshooting |
Change the quality of the faxes I send (Fax Resolution).
You can change the quality of your sent faxes by adjusting the Fax Resolution setting.
You can choose the following Fax Resolution settings:
| Standard | Suitable for most typed documents. |
| Fine | Good for small print and transmits a little slower than Standard resolution. |
| S.Fine | Good for small print or artwork and transmits slower than Fine resolution. |
| Photo |
Use when the document has varying shades of gray or is a photograph. This has the slowest transmission time. |
Please follow the steps applicable for your case.
- To change the Fax Resolution setting for the next fax only, go to Case A: Changing Fax Resolution for the next fax only.
- To change the default Fax Resolution setting, go to Case B: Changing the default Fax Resolution.
Case A: Changing Fax Resolution for the next fax only:
To change the Fax Resolution setting for the next fax you send, follow these steps:
-
Press the FAX key to illuminate it.
-
Load your document(s).
-
Press the RESOLUTION key.
-
Press the UP OR DOWN ARROW key to choose the Fax Resolution setting you want to use. You can choose Standard, Fine, S. Fine, or Photo.
-
Press the MENU/SET key.
-
Enter the fax number you want to send to.
- Press the START key.
Case B: Changing the default Fax Resolution:
To change the machine's default Fax Resolution setting, follow these steps:
-
Press the FAX key to illuminate it.
-
Press the MENU/SET and choose Fax => Setup Send => Fax Resolution.
-
Press the UP OR DOWN ARROW key to choose the default Fax Resolution setting that you want to use. You can choose Standard, Fine, S. Fine, or Photo.
-
Press the MENU/SET key.
- Press the STOP/EXIT key.
Content Feedback
To help us improve our support, please provide your feedback below.
