MFC-9120CN

FAQs & Troubleshooting

FAQs & Troubleshooting

I cannot find the Address Book menu in the Fax Settings or Fax section in a Web Browser or the Remote Setup Program.

The Address Book menu may not appear, this is to avoid a wrong transmission in some cases.  To make the menu appear, follow the instructions below for your case.



Web Browser


image






Remote Setup Program


image



Case 1: Fax Forward setting is ON and Fax Forward # is One Touch or Speed Dial

  1. Click Remote Fax Options or Remote Fax Opt menu in the Fax Settings or Fax section and check the setting for Fwd/Page/Store.
    If Fax Forward is selected and Fax Forward # is One Touch or Speed Dial, the Address Book menu does not appear.
    Turn the setting Off and click OK.


    Web Browser


    image



    Remote Setup Program


    image



  2. Close the Web Browser or Remote Setup Program and restart it. Check if you see the Address Book Menu in the Fax Settings or Fax section.


  3. Once you have finished the changes on the Address Book, turn the Fwd/Page/Store setting back to the original one and click OK.


 

Case 2 :  Jobs are waiting to be sent to a number registered in the Address Book

In case jobs are waiting to be sent by Automatic Redial or Delayed Fax, the Address Book menu does not apper. You can check which jobs are in the memory and cancel jobs following the steps below:
 

  1. Press Menu and choose Fax => Remaining Jobs

  2. Press the UP or DOWN ARROW key to check jobs. If you want to cancel jobs, choose the job and press OK.

  3. Press 1 using the dial pad.

  4. Press Stop/Exit.



If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-7840N, MFC-8370DN, MFC-8380DN, MFC-8880DN, MFC-9120CN, MFC-9320CW, MFC-9970CDW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.