DCP-145C

FAQs & Troubleshooting

FAQs & Troubleshooting

When I turn the Power ON, I always have to re-enter Date and Time. What can I do?

For this Brother series date and time are generated and stored on the main board. If you disconnect the machine from power supply for a long time, the machine cannot keep realistic time. We recommend that you keep the machine connected to the power supply all the time. If you have to disconnect the machine from power supply, for example over night or over the weekend, the machine probably will display wrong date and time.


After initial setup we recommend that you leave the equipment turned on and connected to the power supply for a couple of days. Only then can the battery inside the machine be fully charged and give full performance.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-145C, DCP-165C, DCP-385C, DCP-6690CW, DCP-9040CN, DCP-9042CDN, DCP-J100, DCP-J105, DCP-J140W, DCP-T300, DCP-T500W, DCP-T700W, HL-T4000DW, MFC-250C, MFC-290C, MFC-490CW, MFC-5490CN, MFC-5890CN, MFC-6490CW, MFC-6890CDW, MFC-790CW, MFC-9440CN, MFC-9450CDN, MFC-9840CDW, MFC-J200, MFC-J2310, MFC-J2330DW, MFC-J2510, MFC-J2730DW, MFC-J3530DW, MFC-J3930DW, MFC-J430W, MFC-J5910DW, MFC-J625DW, MFC-J6710DW, MFC-J6910DW, MFC-J825DW, MFC-T4500DW, MFC-T800W, MFC-T810W, MFC-T910DW, MFC-T920DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.