HL-L3230CDN

FAQs & Troubleshooting

FAQs & Troubleshooting

Calibrate Colour Output

The output density for each colour may vary depending on the machine’s environment, including factors like temperature and humidity. Calibrating your machine helps improve the output colour density.
If you are using the Mac printer driver, the printer driver automatically retrieves the calibration data. To retrieve the data manually, you must perform the calibration using Brother's Status Monitor.

HL-L3210CW/HL-L3230CDN/HL-L3230CDW

  1. Press or to select the [Printer] option, and then press OK.
  2. Press or to display the [ColourCorrection] option, and then press OK.
  3. Press or to display the [Calibration] option, and then press OK.
  4. Press or to display the [Calibrate] option, and then press OK.
  5. Press to select [Yes].
    Calibration starts automatically, and will take a few minutes.
  6. Press Cancel.

HL-L3270CDW

  1. Press [Toner]>[Calibration]>[Calibrate].
  2. Press [Yes].
    Calibration starts automatically, and will take a few minutes.
  3. Press .

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-L3230CDN, HL-L3270CDW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.