FAX-2950
 |
FAQs & Troubleshooting |
Cover is Open
Check the solution applicable for your case.
Case 1: The front cover is not completely closed.
Close the front cover of the machine.
Case 2: The Control panel cover is not completely closed.
Make sure that the Control panel cover of your machine is completely closed.
Case 3: The Control panel cover was open when you loaded a document.
Close the Control panel cover of the machine, then press Stop/Exit.
Case 4: The fuser cover is not completely closed or paper was jammed in the back of the machine when you turned on the power.
- Close the fuser cover of the machine.
- Make sure paper is not jammed inside the back of the machine, and then close the fuser cover and press Start.
Content Feedback
To help us improve our support, please provide your feedback below.
