HL-L5100DN

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 02/12/2016
  • ID: faq00100214_001

Reset the Drum Counter

When you replace the drum unit with a new one, you must reset the drum counter by completing the following steps:

DO NOT reset the drum counter unless you are replacing the drum unit.

NOTE: Illustrations shown below are from a representative product and may differ from your Brother machine.

 

  1. Make sure the machine is turned on.
  2. Open the front cover.
    Open the front cover
  3. Press and hold OK for about two seconds to display Drum Unit, and then press OK.
  4. Press the Up arrow key to reset the drum counter.
  5. Close the front cover of the machine.

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-L5100DN, HL-L6200DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit