Model discontinued. This page is no longer updated.

HL-6050D

FAQs & Troubleshooting

FAQs & Troubleshooting

"JAM DUPLEX" error appears on the LCD.

Follow the instructions below to clear a paper jam:

 

  1. Open the back output tray.

  2. Use both hands to slowly pull the jammed paper out of the fuser unit.

  3. Close the back output tray.

    If the paper jam cannot be cleared, go to the next step.

  4. Pull the duplex tray and paper tray out of the printer.

  5. Pull the jammed paper out of the printer.

  6. Put the duplex tray and paper tray back in the printer.

    • The JAM DUPLEX message appears if you remove a sheet of paper from the face down output tray after only one side has printed.
    • The paper sizes you can use with the 2-sided(duplex) printing function are A4, Letter or Legal.
    • If the paper adjustment lever for 2-sided(duplex) printing is not set correctly for the paper size, paper jams may occur and the printing will be out of position on the page.
     
 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-6050D, HL-6050DN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.