HL-3070CW

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 09/26/2011
  • ID: faq00000309_010

Jam Rear

If a paper jam occurs behind the face-up output tray, follow these steps:


  1. Turn off the printer's power switch and unplug the AC power cord.

    Turn Off Switch

  2. Open the back cover.

    Open Back Cover


    After you have just used the printer, some internal parts of the printer will be extremely hot. Wait at least 10 minutes for the printer to cool down before continuing to the next step.

    Do Not Touch

  3. Pull the green tabs at the left and right hand sides toward you and fold down the fuser cover (1).

    Pull Green Tab


  4. Using both hands, gently pull the jammed paper out of the fuser unit.

    Remove Jammed Paper

     

  5. Close the fuser cover (1) and lift the green tabs at the left and right hand sides.

    Close Green Tab


  6. Close the back cover .

    Close Back Cover


  7. Plug the printer back in and then turn on the power switch.

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-3040CN, HL-3070CW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit