PE-DESIGN PLUS2

FAQs & Troubleshooting

FAQs & Troubleshooting

Embroidery

  • Problem that occurs most in embroidery is misalignment of pattern.
    This is caused mostly because a fabric is loose when it's set into an embroidery frame.
    Make sure to set a fabric tightly into an embroidery frame so that you may hear a drum-like sound if you tap the set fabric lightly.

  • Use a stabilizer material when you sew thin fabrics, stretch fabrics or fabrics which easily pucker.
    Prepare a stabilizer material that is larger than an embroidery frame to be used.
    Make sure to attach right surface of stabilizer material to a fabric securely by using an iron.
    Fabric 1 Fusible side of stabilizer

    2 Fabric(wrong side)
  • Use Brother embroidery threads and needle 75/11 for embroidery.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is 1000, Innov-is 1200, Innov-is 1250, Innov-is 1250D, Innov-is 1500D/1500, Innov-is 4000D/4000, Innov-is 4500D, Innov-is 500D, Innov-is 700E, Innov-is 700EII, Innov-is 750E, Innov-is 900, Innov-is 90E, Innov-is 950, Innov-is 955, Innov-is 95E, Innov-is 980D, Innov-is 980K, Innov-is 985D, Innov-is I / Innov-is 6000D, Innov-is Ie, Innov-is NV180, Innov-is NV180D, Innov-is NV180K, Innov-is NV2600, Innov-is NV800E, Innov-is V3, Innov-is V7, Innov-is XP1, Innov-is XV, PE-150V, PE-190D, PE-300S, PE-DESIGN 10, PE-DESIGN 11, PE-DESIGN 8, PE-DESIGN NEXT, PE-DESIGN PLUS, PE-DESIGN PLUS2, PE-DESIGN Ver.5, PE-DESIGN Ver.6, PE-DESIGN Ver.7, SuperGalaxie 3000/3000C/3000D/3100D

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.