PT-E850TKW

FAQs & Troubleshooting

FAQs & Troubleshooting

The tube is not cut completely.

Check the followings:

  • If the depth of half cuts is too deep or too shallow, adjust the cutting depth.
    Press the cover open button to open the top cover, and then move the tube half-cut adjuster to adjust the cutting depth.

    Tube half-cut adjuster

    1 Tube half-cut adjuster

 

To specify a more advanced setting, use the following procedure.

  • When using the Printer Setting Tool:
    Change the [Cut Depth] setting on the [Tube Settings] tab in [Device Settings] in the Printer Setting Tool.
    For details about using the Printer Setting Tool, see the FAQ: “Using the Printer Setting Tool (for Windows)”.

     

  • When using the printer’s keyboard (only for models equipped with the keyboard):
    Select [Settings] - [Tube Adjustment] - [Cut Depth] in the Home screen, set the value using the Upward arrow or Downward arrow key, and then press the OK or Enter key.

     

  • Replace the tube cutter after approximately 50,000 cutting operations (this number may vary depending on the operating conditions).
    The current number of cutting operations can be confirmed using the following procedure.
    • When using P-touch Editor:
      Execute [Help] - [Software Information Scan] in P-touch Editor.

       

    • When using the printer’s keyboard (only for models equipped with the keyboard):
      Select [Settings] - [Memory Usage] - [Parts Usage] - [Tube Cutter Counter] in the Home screen, and then press the OK or Enter key.

 

If the tube cutter has reached the recommended number of cutting operations, replace it with a new one (model number PA-TC-001).
For replacing the tube cutter, see the FAQ: “How do I clean / maintain my printer?".

 

After replacing the tube cutter, reset the counter using the following procedure.

  • When using the Printer Setting Tool:
    Select [Reset Tube Cutter Counter] in the [Device Settings] menu bar in the Printer Setting Tool.

     

  • When using the printer’s keyboard (only for models equipped with the keyboard):
    Select [Settings] - [Reset] - [Reset Tube Cutter Counter] in the Home screen.

If your question was not answered, have you checked other FAQs?

Have you checked manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PT-E800T, PT-E850TKW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.