JS1410

FAQs & Troubleshooting

Contact Us
Product Registration
Visit www.brother.com.sg

The bobbin thread cannot be pulled up.

Needle is turned, bent or the point is dull.

Replace the needle.
Refer to How do I change the needle ?
Bobbin is set incorrectly.

Reset the bobbin thread correctly.
Refer to How do I install the bobbin wound with thread ?
Upper threading is incorrect.

Check the steps for threading the machine and rethread the machine correctly.
Refer to How do I thread my machine ?

Related FAQs

How do I thread my machine?
How do I install the bobbin wound with thread?
How do I change the needle ?

If your question was not answered, have you checked other FAQs?

Go to the Top page in the FAQs & Troubleshooting section
See other FAQs in this category

Have you checked the manuals?

Go to the Manuals section

If you need further assistance, please contact Brother customer service:

Go to the Contact Us section

Related Models

AS1430S, AS2730S, BC-2100/BC-2100PRW, BC-2500, CS-6000/6000b/6000t, DS-120, DS-140, FS101, FS60X, GS2500, GS2700, GS2786K, GS3700, GS3740C, JA1450NT, JK17B, JS1410, JV1400, L14, LX27NT

Content Feedback

To help us improve our support, please provide your feedback below.

FAQs & Troubleshooting

The bobbin thread cannot be pulled up.

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Content Feedback

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Support & Downloads

JS1410

Singapore(English)