Innov-is I / Innov-is 6000D

FAQs & Troubleshooting

FAQs & Troubleshooting

If the thread breaks during sewing.

  1. Press the “Start/Stop” button to stop the machine.
     
  2. If the upper thread is broken, redo the upper threading. If the bobbin thread is broken, press image .
     
  3. Press "OK". After the thread is automatically cut, the carriage will move.

    image
     
  4. Unlock the frame-securing lever and remove the embroidery frame.

    Be careful not to apply strong force to the fabric at this time. Otherwise, the fabric may loosen in the frame.

     

     

    image
     
  5. Insert a wound bobbin into the machine.

    image
  6. Press "OK". The carriage will return to its original position.

    image
     
  7. Attach the embroidery frame.
     
  8. Press image .

    image
     
  9. Press the “Presser Foot Lifter” button to lower the presser foot.
     
  10. Press image .
    The camera view window appears.
     
  11. Press "-1", "-10" or "-100" to move the needle back the correct number of stitches before the spot where the thread broke.

     

    • If you cannot move back to the spot where the thread broke, press image to select the color and move to the beginning position of that color, then use "+1", "+10" or "+100" to move ahead to slightly before where the thread broke.

      image

       

       

    • Press image to enlarge the image in the screen.
    • Press image to remove "image" from the screen.
     

     

  12. Press image to close the camera view window.
     
  13. Press "CLOSE" to return to the original screen.
     
  14. Press the “Presser Foot Lifter” button to lower the presser foot, and press the “Start/ Stop” button to continue sewing.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is I / Innov-is 6000D, Innov-is Ie

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.