Innov-is 55P

FAQs & Troubleshooting

FAQs & Troubleshooting

How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]

This piecing foot can sew an accurate 1/4" (6.4mm) or 1/8" (3.2mm) seam allowance. It can be used for piecing quilt together or topstitching.

 

Video instructions for 1/4 inch Piecing Foot.
Click on the image to play the video instructions.

 

img

* This movie is being streamed from YouTube. (Opening new window.)

 

>> For details, please refer to the operation manual.
   
image

SA125 / F001N (1/4 inch Piecing Foot)

   Manual

image

SA185 / F057 (1/4 inch Piecing Foot with Guide)

   Manual

   

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

AS1430S, AS2730S, BC-2100/BC-2100PRW, BC-2500, BM-3500/2600, BM-3600, CS-6000/6000b/6000t, DS-120, DS-140, FS101, FS60X, GS2500, GS2700, GS2786K, GS3700, GS3740C, Innov-is 10, Innov-is 1000, Innov-is 1200, Innov-is 1250, Innov-is 1250D, Innov-is 1500D/1500, Innov-is 15P, Innov-is 200/200QE, Innov-is 30, Innov-is 35P, Innov-is 400, Innov-is 4000D/4000, Innov-is 4500D, Innov-is 50, Innov-is 55P, Innov-is 600, Innov-is 900, Innov-is 950, Innov-is 955, Innov-is 980D, Innov-is 980K, Innov-is 985D, Innov-is A150, Innov-is A16, Innov-is A80, Innov-is F420, Innov-is I / Innov-is 6000D, Innov-is Ie, Innov-is M370, Innov-is M380D, Innov-is NV180, Innov-is NV1800Q, Innov-is NV180D, Innov-is NV180K, Innov-is NV2600, Innov-is NV2700, Innov-is V7, Innov-is XP1, Innov-is XV, JS1410, L14, LS-2125/2160, LX27NT, NX-200/200QE, NX-250, NX-400Q/400, NX-450, NX-600, PS-53/55/57, QC-1000, XL-2120/2220/2230/2240, XL-2600/2620/2630, XL-5050/5060/5070, XL-5500, XL-5700

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.