Fabric is puckered

Check for the following matters.

 

 

  • Probable cause

    Adjustment of thread tension is not performed properly.

     

    Remedy

    Adjust the thread tension properly.
    Position "4" on the tension dial is the standard of thread tension.
    Start the adjustment with "4" when adjusting thread tension.
    When adjusting the thread tension, change the tension dial position little by little and then check the sewing result with trial sewing.

     

    Refer to the instructions to learn the adjustment of thread tension.

    Instructions for adjustment of thread tension

 

 

  • Probable cause

    The threading on the machine is improper.

     

    Remedy

    Make sure that the threads are passed into the machine properly.
    Rethread the threads to the machine in an appropriate procedure.

     

    Refer to the detailed instructions to learn the threading procedure.

    Instructions for threading the machine.

    You can also see the instructions for threading on movie.

    Video instructions for threading

 

 

  • Probable cause

    Thread is tangled.

     

    Remedy

    Check the spool pin, thread holders, etc., and remove the tangled thread.
    Remove the tangled thread from the machine.

 

 

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

CV3550

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.