Innov-is A80
![FAQs & Troubleshooting FAQs & Troubleshooting](/g/b/shared/img/module/icon_question_33.png) |
FAQs & Troubleshooting |
"E8" message appears on the LCD.
Cause
This message is displayed when
(Twin needle) is turned on, and a stitch pattern that cannot be sewn with the twin needle is selected.
Solution
-
When you want to sew a pattern you selected :
Switch to the single needle mode, and replace the twin needle with a single needle before continuing the operation.
To switch to the needle mode, press
(the needle mode selection key ).
![img img](/g/b/img/faqend/faqh00000403_001/sg/en/1933228/faqh0403_fig0101.gif)
The twin needle mode indicator changes to the single needle mode.
![img img](/g/b/img/faqend/faqh00000403_001/sg/en/1933230/faqh0403_fig0102.gif)
-
When you want to sew with the twin needle :
Select a pattern that can be sewn with the twin needle.
Refer to Stitch Chart on the operation manual to learn stitches that can be sewn with a twin needle.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models
Innov-is A80
Content Feedback
To help us improve our support, please provide your feedback below.