"Turn off the power and replace the needle plate." message appearing on the LCD.
What does it mean and how do I clear it?
This message is displayed when you try to sew with a stitch other than a middle needle position stitch while the single-hole needle plate is installed.
This message is displayed when the needle plate is removed with the machine on or when the machine is turned on in the embroidery or embroidery edit mode.
If the operation procedure was correct, the machine will beep once.
If the operation procedure was incorrect, the machine will beep twice or four times.
To turn the alarm on or off, press .
If your question was not answered, have you checked other FAQs?
.
