DCP-T710W

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 05/11/2020
  • ID: faq00100029_008

Enable the Brother machine's network interface.

Follow the steps below to enable or disable the Brother machine's network interface.

 

  1. Press Settings or Menu.
  2. Press the Up or Down arrow key to select Network and press OK.
  3. Press the Up or Down arrow key to select WLAN Enable and press OK.
  4. Press the Up or Down arrow key to select On or Off.
  5. Press OK.
  6. Press Stop/Exit.

(For wireless network users)
If you want to set up your Brother machine on a wireless network, see the following FAQ.
> Click here to see how to set up your Brother machine on a wireless network.

If your Brother machine still having an issue over the network feature, see the Related FAQs at the end of the page.

 

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-J140W, DCP-J152W, DCP-J315W, DCP-J572DW, DCP-T500W, DCP-T510W, DCP-T700W, DCP-T710W, MFC-255CW, MFC-J265W, MFC-J415W, MFC-J430W, MFC-J470DW, MFC-J480DW, MFC-J491DW, MFC-T800W

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit