MFC-8910DW

FAQs & Troubleshooting

FAQs & Troubleshooting

Configure the boot method through the front panel of my Brother machine.

Follow the steps below to configure the boot method.


  1. Press Menu.

  2. Press the Up or Down arrow key to choose Network and press OK.

  3. Press the Up or Down arrow key to choose Wired LAN or WLAN and press OK.

  4. Press the Up or Down arrow key to choose TCP/IP and press OK.

  5. Press the Up or Down arrow key to choose Boot Method and press OK.

  6. Press the Up or Down arrow key to choose Auto, Static, RARP, BOOTP or DHCP and then press OK.

  7. For all selections, except Static, you will be asked to specify the number of times the machine tries to obtain an IP address - IP Boot Tries. The default is 3. Press OK.

  8. Press Stop/Exit.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-8910DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.