MFC-9970CDW
 |
FAQs & Troubleshooting |
Log on as a restricted user when the Secure Function Lock feature is turned ON
To switch between registered restricted users or Public mode when Secure Function Lock is turned on, follow the steps listed below.
Changing to the restricted user Mode:
*If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.
Changing to the Public Mode:
After a restricted user has finished using the machine, it will return to the Public setting within the same time as the Mode Timer setting (Menu => General Setup => Mode Timer).
You can also exit from the restricted user mode by following the steps below.
*If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.
Changing to the restricted user Mode:
*If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.
- Hold down Shift as you press Secure or Secure Print.
- Press the Up or Down arrow key to choose your user name(ID). Press OK.
- Enter your four-digit password. Press OK.
- Press Public or xxxxx (where xxxxx is the user's name).
- Press Change User.
- Press the Up or Down arrow key to display your user name. Press your user name.
- Enter your four-digit password. Press OK.
Changing to the Public Mode:
After a restricted user has finished using the machine, it will return to the Public setting within the same time as the Mode Timer setting (Menu => General Setup => Mode Timer).
You can also exit from the restricted user mode by following the steps below.
*If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.
- Press the current Mode key you are in.
- The LCD will ask you Go to Public?.
- Press 1 to choose Yes.
- Press xxxxx (where xxxxx is the user's name).
- Press Go to Public.
Content Feedback
To help us improve our support, please provide your feedback below.
