DCP-8085DN
![]() |
Часто задаваемые вопросы и устранение неполадок |
How do I clear the message "No Paper" from the display?
- Verify the scrolling message displayed at the bottom of the LCD. This will specify which tray is experiencing the problem: MP Tray, Tray1 or Tray 2.
- If the specified tray is the tray that you trying to print from, continue to STEP 2.
- If the specified tray is NOT the tray that you are trying to print from and you are printing a document from your computer, the paper source setting will need to be changed within the settings of the application from which you are printing. Please refer to the solution - When I try to print from Microsoft® Word, I receive a message stating: "No Paper" , "Reload paper in MP Tray" or "Insert Paper Manual Feed".
- If the specified tray is the tray that you trying to print from, continue to STEP 2.
- Verify there is paper in the tray specified in the scrolling message:
- If paper is loaded in the tray continue to STEP 3.
- If there is no paper in the tray, load the paper by following the instructions listed below:
- While pressing the blue paper-guide release levers, slide the side and back paper guides to fit the paper size you are loading in the tray. Make at the paper-guides are set to the correct paper size. The guides should only hold the paper in place without actually applying pressure.
- Fan the paper well to avoid paper jams or misfeeding and then load the paper in the tray.
- Do not overfill the tray.
- While pressing the blue paper-guide release levers, slide the side and back paper guides to fit the paper size you are loading in the tray. Make at the paper-guides are set to the correct paper size. The guides should only hold the paper in place without actually applying pressure.
- If paper is loaded in the tray continue to STEP 3.
- The maximum paper levels of Tray 1 and Tray 2 are marked on the right paper-guide with a red line with three arrows pointing at it.
- The maximum paper level of the MP Tray is marked on the left and right paper-guides with a line with an arrow pointing at it.
-
- If the specified tray is the MP Tray and the problem continues, please contact Brother Customer Service from "Contact Us".
- If the specified tray is Tray 1 or Tray 2 install the paper tray firmly back into the Brother machine.If the problem continues go to STEP 4.
- If the specified tray is the MP Tray and the problem continues, please contact Brother Customer Service from "Contact Us".
- Remove the paper tray from the machine and verify that the paper-guides are set to the correct positions marked on the tray for the paper size being loaded. The guides should only hold the paper in place without actually applying pressure.
- Install the paper tray firmly back into the machine.
If the problem continues, please contact Brother Customer Service from "Contact Us".
Если вам не удалось найти ответ на свой вопрос, вы не пробовали просмотреть ответы на другие вопросы?
Отзывы о материалах
Чтобы помочь нам улучшить поддержку пользователей, просим вас поделиться своим мнением, ответив на вопросы ниже.