Modelul a fost întrerupt. Această pagină nu mai este actualizată.

HL-8050N

Întrebări frecvente şi depanare

Întrebări frecvente şi depanare

When I load the Brother software, the installation will not continue past the instruction to connect the USB cable to the computer. What can I do? (USB interface, cable)

This issue can occur if you were unsuccessful in an attempt to install the Brother software and did NOT remove it from your computer before attempting the install again. It can also occur if you connected the USB cable before the software installation prompt appeared.

  1. Please check that the LEDs are not indicating an error. If it is you will need to resolve this before installing the software.
  2. Please check that the cable is connected under the main cover in the correct socket marked with a USB symbol.

  3. Verify the USB cable you are using meets the required specifications and connections listed below:

    a. It is recommended that the USB cable an A/B device cable, and no longer than 1.8 meter. Although the connectivity may still be good with a longer cable, Brother suggests that the shorter the cable is, the better the rate of success will be.


    USB USB


    b. Verify the USB cable is NOT USB to Parallel.  If so, you must replace the cable.

    c. If you are using a USB hub, disconnect the cable from the hub and connect it directly to the computer.

    Do not connect the machine to a USB port on a keyboard or a non powered USB hub.




    d. If a USB card was installed on the computer, remove the cable from the port attached to the card and connect the cable to the USB port that came with the computer.

    e. If the cable you are using and the connection to your computer meets the requirements listed above and the installation does not resume continue to Step 4.

  4. Try connecting to a different port on the pc. If the installation does not resume, continue to Step 5.

  5. Try another identical USB cable. If the installation does not resume, continue to Step 6.

  6. Use the "Uninstall Tool" to reactivate the Plug&Play on your computer and retry to install the software.

If the computer still does not detect the machine, please contact Brother Customer Service from "Contact Us".

Dacă nu aţi primit răspuns la întrebarea dumneavoastră, aţi verificat celelalte întrebări frecvente?

Aţi verificat manualele?

Dacă aveţi nevoie de asistenţă suplimentară, vă rugăm să contactaţi serviciul de asistenţă clienţi Brother:

Modele asociate

HL-1430, HL-1440, HL-1450, HL-1470N, HL-1650, HL-1670N, HL-1850, HL-1870N, HL-2030, HL-2040, HL-2070N, HL-2140, HL-2150N, HL-2170W, HL-2460, HL-2600CN, HL-2700CN, HL-3450CN, HL-4040CN, HL-4050CDN, HL-4070CDW, HL-5030, HL-5040, HL-5050, HL-5070N, HL-5130, HL-5140, HL-5150D, HL-5170DN, HL-5240, HL-5240L, HL-5250DN, HL-5270DN, HL-6050D, HL-6050DN, HL-7050, HL-7050N, HL-8050N

Spuneţi-vă părerea despre conţinutul furnizat

Pentru a ne ajuta să îmbunătăţim serviciile de asistenţă, vă rugăm să vă spuneţi părerea.

Pasul 1: În ce mod vă ajută informaţiile de pe această pagină?

Pasul 2: Doriţi să adăugaţi comentarii?

Vă rugăm să ţineţi cont de faptul că acest formular este folosit numai pentru feedback.