MFC-L5750DW

Odpowiedzi na często zadawane pytania i rozwiązywanie problemów

Odpowiedzi na często zadawane pytania i rozwiązywanie problemów

Paper is Jammed in the 2-sided Tray

If the machine's control panel or the Status Monitor indicates that there is a jam in the 2-sided paper tray, follow these steps:
  1. Leave the machine turned on for 10 minutes for the internal fan to cool the extremely hot parts inside the machine.
  2. Pull the paper tray completely out of the machine.
  3. At the back of the machine, pull the 2‑sided tray completely out of the machine.
  4. Pull the jammed paper out of the machine or out of the 2‑sided tray.
  5. Remove paper that may have jammed under the machine due to static electricity.
  6. If paper is not caught inside the 2-sided tray, open the back cover.
    WARNING
    HOT SURFACE

    The machine's internal parts will be extremely hot. Wait for the machine to cool down before touching them.

  7. Use both hands to gently pull the jammed paper out of the back of the machine.
  8. Close the back cover until it locks in the closed position.
  9. Put the 2-sided tray firmly back in the rear of the machine.
  10. Put the paper tray firmly back in the front of the machine.

Jeśli Twoje pytanie pozostaje bez odpowiedzi, czy sprawdziłaś/sprawdziłeś inne odpowiedzi na często zadawane pytania?

Czy zapoznałaś/zapoznałeś się z podręcznikami?

Jeśli potrzebujesz dalszej pomocy, skontaktuj się z działem obsługi klienta firmy Brother:

Powiązane modele

DCP-L5500DN, DCP-L6600DW, MFC-L5700DN, MFC-L5750DW, MFC-L6800DW(T), MFC-L6900DW(T), MFC-L6950DW, MFC-L6970DW

Opinie dotyczące treści

Aby pomóc nam udoskonalać naszą pomoc techniczną, przekaż poniżej swoją opinię.

Krok 1: Na ile informacje na tej stronie były dla Ciebie pomocne?

Krok 2: Czy chcesz dodać własne komentarze?

Prosimy pamiętać, że niniejszy formularz służy wyłącznie do wyrażania opinii.