MFC-L8900CDW

FAQs & Troubleshooting

FAQs & Troubleshooting

Uneven density appears periodically across the page.

Uneven density appears periodically across the page

 

Check the following points to resolve the issue:

 

  1. Perform the calibration using the Touchscreen/Control Panel or the printer driver.
    > Click here to see how to carry out calibration.
  2. Adjust the copy density and contrast if you are copying.
    > Click here to see how to adjust the copy density and contrast.
  3. Clear the Improve Gray Color check box in the printer driver.
  4. Identify the color causing the issue and put in a new toner cartridge.

    To identify the color of the toner cartridge or replace toner cartridge, follow the steps below:

     

    1. > Click here to print the chart. [345KB/ PDF]
    2. Compare your printed document with the printed chart to identify the color that is uneven.
    3. Replace the toner cartridge of the color.
       > Click here to see the details of how to replace the toner cartridge.
  5. Install a new drum unit.
     > Click here to see how to replace the drum unit.


 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-L8900CDW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.