HL-4040CDN

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 20/03/2014
  • ID: faq00000026_017

How do I clear paper jams?

If paper jams inside the printer, the printer will stop. One of the following LCD messages will appear to tell
you where to find the jammed paper.


  1. "Jam MP Tray" : Click here to clear "JAM MP TRAY".
  2. "Jam Tray1" : Click here to clear "JAM TRAY1".
  3. "Jam Rear" : Click here to clear "JAM REAR".
  4. "Jam Inside" : Click here to clear "JAM INSIDE".
  5. "Jam Duplex"  : Click here to clear "JAM DUPLEX".

Check where the jam is and clear the jammed paper.
If the error message still appears on the LCD after you remove the jammed paper, there may be more paper jammed somewhere else. Check the printer thoroughly.
After you have removed all the jammed paper, open the front cover and then close it again to start printing.

 

Always remove all paper from the paper tray and straighten the stack when you add new paper. This helps prevent multiple sheets of paper from feeding through the printer at one time and prevents paper jams.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-4040CDN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit