Innov-is A150

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 19/02/2020
  • ID: faqh00101510_000

Outline of viewing the LCD Screen

 

When the machine is turned on, the LCD will light up and the following screen is displayed.To change the displayed settings, use the operation keys.

 

 

img01

 

No. Display Item Name Explanation
(1) img02 Presser foot

Shows the symbol for the presser foot to be used. Before sewing, attach one of the presser feet shown here.

img03 Zigzag foot “J” img04 Blind stitch foot “R”
img05 Monogramming foot “N” img06 Button fitting foot “M”
img07 Overcasting foot “G” img08 Side cutter “S”
img09 Buttonhole foot “A”  

* The symbols for certain presser feet, such as zipper foot “I” and the quilting foot, may not appear in the screen.
(2) – Stitch preview Shows a preview of the selected stitch.
(3) img10 Stitch category

Shows the category of the currently selected stitch pattern.

img11 :  Preset utility stitch
img12 :  Utility stitch
img13 :  Decorative stitch (category 1: Decorative stitches)
img14 :  Decorative stitch (category 2: Decorative satin stitches/Satin stitches/Cross stitch stitches)
img15 :  Decorative stitch (category 3: Utility decorative stitches)
img16 :  Character stitch (Gothic font)
img17 :  Character stitch (Handwriting font)
img18 :  Character stitch (Outline)
img19 :  Character stitch (Japanese font)

 
(4) – Stitch number

Shows the number of the currently selected stitch pattern.
(5) img20 Needle position setting

Shows whether the needle is in the programmed raised or lowered position. In addition, shows whether the single needle mode or twin needle mode is selected.

img21 : Single needle/down position img22 : Twin needle/down position
img23 : Single needle/up position img24 : Twin needle/up position
(6) img25 Single/repeat sewing

Shows single or continuous stitch patterns sewing mode setting.

img26 : Single sewing mode img27 : Repeat sewing mode
(7) img28 Horizontal mirror image Appears when the stitch is mirrored.
(8) img29 Stitch width Shows the stitch width of the currently selected stitch pattern.
(9) img30 Stitch length Shows the stitch length of the currently selected stitch pattern.
(10) img31 Automatic reverse/
reinforcement stitching		 Shows that the automatic reverse/reinforcement stitching is currently turned on.
(11) img32 Automatic thread cutting Shows that the programmed thread cutting is currently turned on.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is A150

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit