Follow the steps below to create a small label.
 

1. Set the margin to "Narrow".
    
   1. Press the [Label] key (  /  ).
   2. Press  or  to select "Margin".
   3. Press  or  to select "Narrow"
       
2. Set the desired length of the tape.
    
   1. Press  or  to select "Length".
   2. Press  or   to set the required label length.
   3. Press the [OK] key (  ) or [Enter] key (  /  ) to apply the settings.

      To align characters in the center of the tape,
      1) Press the [Font] key ( / ).
      2) Press  or to select "Align".
      3) Press or    to select "Center".

      4) Press the [OK] key (  ) or [Enter] key (  /  ) to apply the settings.



3. Enter the required text for your label.
   • The text is resized automatically to fit the length of label selected.
   • When "Text Too Long!" error is displayed, shorten the text or set the label length to a higher value (longer length).