FS60X

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 27/08/2020
  • ID: faqh00101510_003

Outline of viewing the LCD Screen

When the machine is turned on, the LCD will light up and the following screen is displayed.

img

No. Item Name Explanation
(1) Stitch number Shows the number of the currently selected stitch pattern.
(2) Presser foot

Shows the symbol for the presser foot to be used. Before sewing, attach one of the presser feet shown here.

img : Zigzag foot "J"
img : Buttonhole foot "A"
img : Overcasting foot "G"
img : Blind stitch foot "R"
img : Monogramming foot "N"

 

* The symbols for certain presser feet, such as zipper foot "I" and the quilting foot, may not appear in the screen.
(3) Stitch length

Shows the stitch length of the currently selected stitch pattern.

When img is displayed around img , the stitch length is set to the default value.
(4) Stitch width

Shows the stitch width of the currently selected stitch pattern.

When img is displayed around img , the stitch width is set to the default value.
(5) Needle stop position

Shows whether the needle stop position is set to the lowered position or the raised position.
In addition, shows whether the single needle mode or twin needle mode is selected.

img : Lowered position / Single needle mode
img : Lowered position / Twin needle mode
img : Raised position / Single needle mode
img : Raised position / Twin needle mode
(6) Needle mode (single needle / twin needle)

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

FS60X

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit