2104D

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 05/03/2009
  • ID: faqh00000519_000

Skipped stitches

  1. Needle bent, or needle tip blunt.
    Replace with new needle.

  2. Needle incorrectly installed.
    Install needle correctly.

  3. Wrong needle used.
    Use correct needle. Schmetz 130/705H - suggested.

  4. Improper threading.
    Thread correctly.

  5. Presser foot pressure too loose.
    Turn the pressure adjustment screw clockwise to increase the presser foot pressure.

  6. Thread tensions are not adjusted properly.
    Adjust the thread tension.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

1334D, 2104D, 3034D

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit