MFC-7290

FAQs & Troubleshooting

FAQs & Troubleshooting

I just replaced the toner cartridge and the LCD continues to display the message "Toner Low" / "Replace Toner" / "Toner Ended" or the Toner LED is still on or flashing.

If the machine's display or LED continues to show the Toner Low, Replace Toner or Toner Ended error indication after installing a new toner cartridge, follow the steps below to resolve the issue.

 

  1. Verify that you didn't replace incorrect consumable by mistake.

    The Brother machine has separate consumables the toner cartridge and the drum unit. Verify you replace only the toner cartridge and not the drum unit.
    > Click here to see information for the difference between the toner cartridge and the drum unit.
     
  2. Verify you are using a NEW toner cartridge.

    When replacing the toner cartridge, you MUST install a brand new, unused toner cartridge in order to reset the toner status. Swapping toner cartridges from one machine to another or installing a partially used toner cartridge may cause this issue. If you install a partially used toner cartridge, your Brother machine is unable to recognize toner consumption correctly which will cause this issue. Therefore, when you replace the toner cartridge, use a brand new toner cartridge, not a partially used toner cartridge from another machine. 
     
  3. Verify the toner cartridge is installed correctly.

    If you install a new toner cartridge but the "Toner Low", "Replace Toner" or "Toner Ended" error indication remains, the toner cartridge may not be installed correctly.
    Reinstall the toner cartridge, referring to the instructions on how to replace the toner cartridge.
    > Click here to see how to reinstall the toner cartridge.

    Confirm that you have installed both a toner cartridge and a drum unit in the machine.

  4. Clean the corona wire.

    This issue may have occurred because the corona wire has become dirty.
    > Click here to see the details of how to clean the corona wire.
     
  5. Update the firmware to the latest version.

    Go to Downloads section of this website to check the latest version of the firmware.

     

    • If you see the Firmware Update Tool in the Downloads section, check detail information to identify the firmware version.
      If the firmware version of your Brother machine is earlier than the latest version, update the firmware. Follow the installation instructions on the download page.
       
    • If you do not see the Firmware Update Tool in the Downloads section, contact Brother Customer Service from "Contact Us".
    > Click here to visit the Downloads section to check the latest version of the firmware.

If the issue continues, contact Brother Customer Service from "Contact Us".

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-1510, DCP-1615NW, DCP-7055, DCP-7065DN, DCP-L2540DW, DCP-L2550DW, FAX-2840, FAX-2950, HL-1110, HL-1210W, HL-2130, HL-2240D, HL-2270DW, HL-L2365DW, HL-L2375DW, HL-L5100DN, HL-L6400DW, MFC-1810, MFC-1815, MFC-1910W, MFC-7290, MFC-7360, MFC-7470D, MFC-7860DW, MFC-L2700D, MFC-L2700DW, MFC-L2740DW, MFC-L2750DW, MFC-L5900DW, MFC-L6900DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.