Model discontinued. This page is no longer updated.

Where is the Manual 2-sided(Duplex) setting option in the Mac OS X 10.3 driver ?

Refer to the instructions below:


  1. Select "Print" from the "File" menu and open the "Print" dialogue.
  2. Select the "Paper Handling" option in the "Presets" section.

  3. Select "Even numbered pages" and click on "Print" button.

  4. After the even pages are printed, remove them from the Output Tray, flip over the paper and place back into the Paper Feed Tray, so that the printed pages face up, with the bottom edge first.

  5. Again select the "Paper Handling" option in the "Presets" section as you did in the Step 2.

  6. Select "Odd numbered pages" and click on "Print" button.

    Check the "Reverse page order" box depending on the setting of the "Input Tray" or "Output Tray".

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-7010, FAX-2820, FAX-2850, FAX-2920, HL-1230, HL-1240, HL-1250, HL-1270N, HL-1440, HL-1450, HL-1470N, HL-2030, HL-2040, HL-2070N, HL-5040, HL-5050, HL-5070N, MFC-4800, MFC-7220, MFC-7420, MFC-8220, MFC-8440, MFC-9160, MFC-9180, MFC-9660, MFC-9880

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.