Model discontinued. This page is no longer updated.

Drum Life End Soon

The message Drum Life End Soon indicates the drum unit will need to be replaced soon.


When the Drum Life End Soon message appears, the following LED indications is shown on the control panel. The Ready LED is on and the Drum LED is turning on 2 seconds and off for 3 seconds.


LED indications


 

Even with the Drum LED flashing or the message Drum Life End Soon on the status monitor, you can still continue to print. You can replace the drum unit when you feel the print quality is no longer acceptable.

 

However, it is a good idea to have a new drum unit and have it ready for when there is a noticeable deterioration in the output print quality.
> For the order number (Order No.) of the drum unit, please click here to see the Consumables & Options page.


The Brother machine has separate consumables the toner cartridge and the drum unit. Verify you replace only the drum unit and not the toner cartridge. If you want to know their difference, refer to "What is the difference between the toner cartridge and the drum unit?"


If you have a print quality problem, it's time to replace the drum unit.
Please replace the drum unit with a new one, referring to the instructions on how to replace the drum unit.


 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-2030, HL-2040, HL-2070N

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.