Model discontinued. This page is no longer updated.

HL-1450

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 24/08/2006
  • ID: faq00000295_000

Why are all the lights blinking then the drum light blinking?


It indicates Fuser Malfunction.When any of the following error is indicated, turn the printer Off, wait 5 seconds and then turn the printer On again.

 


If the alarm continues, perform a Factory Reset:

  1. Turn the printer off.
  2. Hold in the circular button on the front panel of the printer.
  3. Turn the printer back on.
  4. When the DRUM light is lit by itself let go of the button.
  5. Hold in the circular button on the front panel again.
  6. Once the Alarm light comes on, let go of the button.
  7. This has performed a factory reset on the printer.

 

If this does not clear the problem, consult your dealer or our authorized service representative.

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-1230, HL-1240, HL-1250, HL-1270N, HL-1440, HL-1450, HL-1470N

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit