Model discontinued. This page is no longer updated.

HL-5040

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 17/06/2014
  • ID: faq00000095_006

How do I install the Optional Tray Unit? - For Europe and Asia/Oceania

  1. Turn off the printer power switch, and remove all the cables from the machine.


     
  2. Lift the machine carefully with both hands and place it onto the lower tray unit, so that the alignment pins of the lower tray unit are inserted into the guide holes on the bottom of the machine.


     
  3. Remove the paper tray from the lower tray option, and swap it with the tray already fitted in your machine. Reconnect all cables and switch on the printer.


     
  4. Go to Start > Settings > Printers. Right click on your printer and choose Properties. Choose the Accessories tab and click Autodetect, once the lower tray has been detected then click Apply. (Under certain conditions the Autodetect function may be unavailable.)

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-5040, HL-5050, HL-5070N, HL-5140, HL-5150D, HL-5170DN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit