Innov-is VM5200

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I attach the Embroidery foot “W+” with LED pointer or “W”?

By plugging in the connector on the back of your machine, the embroidering needle drop point will be indicated on the fabric, allowing you to accurately position the pattern.

 

  • When attaching a presser foot, always press image on the screen. You may accidentally press the “Start/Stop” button and possibly cause injury.
  • Be sure to use embroidery foot when doing embroidery. Using another presser foot may cause the needle to strike the presser foot, causing the needle to bend or break and possibly cause injury.

 

  1. Press the “Needle Position” button to raise the needle.

    image
  2. Press image .

    The entire screen becomes white, and all keys and operation buttons are locked.


  3. Raise the presser foot lever.


    image

  4. Push the black button on the presser foot holder and remove the presser foot.

    image

    (1) Black button (2) Presser foot holder

  5. Use the included screwdriver to loosen the screw of the presser foot holder, then remove the presser foot holder.

    image

    (1) Screwdriver (2) Presser foot holder (3) Presser foot holder screw

  6. Position the embroidery foot “W+” with LED pointer or “W” on the presser foot bar by aligning the notch of the embroidery foot to the large screw.

    Side view

    image


  7. Hold the embroidery foot in place with your right hand, and then use the included screwdriver to securely tighten the presser foot holder screw.

    image

    Use the included screwdriver to firmly tighten the screw of the embroidery foot. If the screw is loose, the needle may strike the embroidery foot and possibly cause injury.

    → For users of embroidery foot “W”, skip step8 and go to step9.


  8. Plug the connector of the embroidery foot “W+” with LED pointer into the jack on the back of your machine.

    image

  9. Press image to unlock all keys and buttons.

    All keys and operation buttons are unlocked, and the previous screen is displayed.


If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is VM5100, Innov-is VM5200, Innov-is VM6200D

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.