ADS-1600W

FAQs & Troubleshooting

FAQs & Troubleshooting

Replace Pad

Your machine is equipped with a scan counter. The counter automatically counts how many times the machine has scanned. When the machine scans 10,000 times, the machine will display a message on the Status Monitor to remind you to replace the Separation Pad. Follow the steps below to replace the Separation Pad.

 

  1. Open the Top Cover (1) and the Front Cover (2).
     
    OpenTop_CrontCover
  2. Slide the Separation Pad Holder up.
     
    SlideSeparationPadHolderUp

     

     

    Be careful when touching the Separation Pad and its surrounding area in the machine. Otherwise, you could cause serious damage to the machine.

    DonotTouchSeparation

     

     

  3. Pinch and pull the Separation Pad upward.
     
    PinchSeparationPad
  4. Attach a new Separation Pad.
     
    AttachSeparationPad
  5. Securely slide the Separation Pad Holder down.
     
  6. Close the Front Cover and the Top Cover.
     
  7. Reset the counter. Follow the steps below to reset the counter.

     

    1. Press Settings(Settings).
       
    2. Press the Up or Down arrow key to display Machine Info..
       
    3. Press Machine Info..
       
    4. Press Usage Counters.
       
    5. To reset the counter for the Separation Pad, press Separation Pad Count.
       
    6. The LCD shows the confirmation message. Press Yes.
       
    7. Press Home.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

ADS-1600W

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.