TJ-4422TN

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I connect the printer via Bluetooth®/Wi-Fi®/wired network?

  • To use Bluetooth or Wi-Fi, an optional WLAN / BT Interface (PA-WB-001) is required.
  • For Wi-Fi connection:

    Make sure both your wireless access point/router's and your printer's network settings are correctly set up. For more information, see the documentation provided with your wireless access point/router, or contact the router manufacturer, your system administrator, or Internet service provider.

  • For Mac user:
    Bluetooth connection is not available.

 

Install the optional WLAN / BT Interface PA-WB-001 (for Bluetooth/Wi-Fi connection)

 

Follow the steps below to attach the optional WLAN / BT Interface (PA-WB-001) before connecting to Bluetooth or Wi-Fi.

The optional (PA-WB-001) consists of the following items:
WLAN / BT Interface
1. PA-WB-001
2. Antenna (x2)
3. Spare Screw (x2)

  1. Remove the cover.
    TJ-4420TN/4520TN/4620TN TJ-4422TN/4522TN
    TJ-4420TN/4520TN/4620TN TJ-4422TN/4522TN

  2. Install the PA-WB-001.
    TJ-4420TN/4520TN/4620TN TJ-4422TN/4522TN
    TJ-4420TN/4520TN/4620TN TJ-4422TN/4522TN

  3. Install two antennas.
    TJ-4420TN/4520TN/4620TN TJ-4422TN/4522TN
    TJ-4420TN/4520TN/4620TN TJ-4422TN/4522TN

 

 

Install the Windows driver via Bluetooth/Wi-Fi/wired network

 

For details on how to install the driver, refer to the following section in the FAQ "How to connect the printer to your computer":

  • For Bluetooth connection: "Bluetooth® Connection (Windows)"
  • For Wi-Fi connection: "Wi-Fi® Network Connection (Windows)"
  • For wired network connection: "Wired Network Connection (Windows)"

If your question was not answered, have you checked other FAQs?

Have you checked manuals?

If you need further assistance, please contact Brother customer service:

Related Models

TJ-4420TN, TJ-4422TN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.