TJ-4422TN

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 28/09/2020
  • ID: faqp00100467_004

How to clean the Print Head

Clean the Print Head when replacing the label roll with a new one.

  • Always turn off the printer before cleaning the Print Head.
  • Allow the Print Head to cool down for at least one minute.
  1. Turn off the printer.

  2. Open the Media Cover.
    Open the Cover

  3. Push the Print Head Release Lever to open the Print Head.
    Oepn the Print Head

  4. Wipe the Print Head with a cotton swab dipped in isopropyl alcohol or ethanol.
    Wipe the Print Head
    1.  Cotton Swab
    2.  Print Head Surface
    3.  Print Head

  5. Close the Print Head by pushing down on both sides and make sure it locks into place.
    Close the Print Head

  6. Close the Media Cover.
    Close the Cover

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked manuals?

If you need further assistance, please contact Brother customer service:

Related Models

TJ-4420TN, TJ-4422TN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit