> For Windows:

>For Mac:

For Windows

Use the following procedure to print from a computer using a wireless connection.
 

1. Download and install the printer driver and P-touch Editor from the [Downloads] section of this website and then start the installer.
    
2. When installing the printer driver, the setting items for the wireless network connection will be displayed. Select [Wireless Network Connection] and continue with the installation.

   QL-710W:	QL-720NW:



3. Select [Brother Peer-to-Peer Network Printer] and then click [Next].
   


4. Select [Change the Firewall port settings to enable network connection and continue with the installation. (Recommended)], and then click [Next].
   


5. Establishing a wireless network connection.
   If your WLAN access point/router has the WPS symbol, settings and connections can be configured easily. If not, connect it wirelessly using USB cable.
   
   > Using WPS to connect wirelessly:
   > Using a USB cable to connect wirelessly:
   
   Using WPS to connect wirelessly:
   Select [No, I do not have a USB cable.] and click [Next], and then follow the installer instructions to complete the installation.
   
   
   Using a USB cable to connect wirelessly:
   Prepare the USB cable, select [Yes, I have a USB cable to use for installation], and then click [Next]. Then follow the installer instructions.
   


6. When the installation is complete, click [Finish] to close the installer window. The Wi-Fi LED of the printer lit in green.


7. After installing the printer driver, install P-touch Editor. Then, start P-touch Editor to create and print labels wirelessly.
    

For Mac

1. To connect via Wi-Fi, download the Wireless Device Setup Wizard from the [Downloads] section of this website.

   To print using your printer, download the P-touch Editor from the website above. For OS X 10.11 or lower users, Printer Driver must be installed to print.

2. After you download the Wireless Device Setup Wizard, double-click the downloaded file.


3. Follow the on-screen instructions to configure the wireless settings between the printer and your wireless router/access point.

   We recommend using a USB cable to complete the connection.

4. When selecting the wireless router/access point, make sure you select the SSID that you confirmed previously.


5. Connect your computer to the wireless router/access point.
    
6. Make sure the Wi-Fi function of your computer is activated.
   Select the SSID that you used in step 4. The connection between your computer and your wireless router/access point will be established.
   If your computer is already connected to a Wi-Fi network, go to the next step.
    
7. Start the P-touch Editor and select the printer from the list.
    
8. You can now edit and print labels wirelessly from your computer.