CM550DX/ CM550
![FAQs & Troubleshooting FAQs & Troubleshooting](/g/b/shared/img/module/icon_question_33.png) |
FAQs & Troubleshooting |
What should I do if part of the material is not cut?
If part of the material is not cut, the cutting pressure may not be set appropriately for the material.
![image image](/g/b/img/faqend/faqh00100596_000/nz/en/1169193/faqh455_fig0001.gif)
Increase the cutting pressure by 1, and then perform trial cutting.
![image image](/g/b/img/faqend/faqh00100596_000/nz/en/1244287/faqh596_fig00001.gif)
When the blade is strongly pressed against the material, the material may lift off the mat. If you adjust the cutting pressure, increase by 1.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models
CM110, CM350, CM550DX/ CM550, CM900
Content Feedback
To help us improve our support, please provide your feedback below.